YOSH TUNED
Hondata K-PRO/S300 E-Tune
Hondata K-PRO/S300 E-Tune
Choose your vehicle and tuning options below to see your exact price.
Your setup. Your fuel. Your custom tune. Choose the options below and provide the required vehicle details.
Choose the fuel you will use. Your exact pump-gas octane is recorded with the order for your custom calibration.
Please choose your fuel before adding to cart.
Vehicle & Tuning Details
Tell us about your vehicle, modifications, and fuel so we can prepare your custom starting calibration. Only the relevant fields will appear.
Please complete the required vehicle and tuning details before adding the tune to your cart.
Couldn't load pickup availability
Custom remote ECU tuning developed for your specific vehicle, modifications, and fuel. Hardware is not included.
What's included
Custom starting calibration, datalog review, calibration revisions through your tuning process, and final calibration when tuning is completed. Supported fuel, ignition, cam, and boost settings are addressed as applicable to your ECU and setup.
Before you buy
You'll need compatible tuning hardware, software, and the necessary datalogging equipment. Your vehicle must be mechanically sound and ready to tune. Check platform compatibility before purchasing.
How the tuning process works
- Select the correct vehicle, setup, and fuel options.
- Provide the required vehicle and modification details, then complete checkout.
- Follow the instructions supplied with your custom starting calibration.
- Submit the requested datalogs for review and receive revisions as needed.
Important: A starting calibration is not a finished tune. Don't perform wide-open-throttle pulls unless specifically instructed.
Full tuning details & requirements
Hondata K-Pro & S300 Remote E-Tuning
Get a custom calibration built specifically for your Honda or Acura engine, modifications, fuel, and intended use using a compatible Hondata K-Pro or S300 system.
Select your Setup, Fuel, and Platform above to see the correct price.
What’s Included
- Custom starting calibration for your setup
- Cold-start and idle adjustments
- Normal-driving and part-throttle optimization
- Wide-open-throttle fuel and ignition tuning
- VTEC and cam-angle optimization where supported
- Injector, MAP sensor, wideband, and boost-control configuration where applicable
- Calibration revisions based on your datalogs
- Final calibration after the tuning process is completed
- Email guidance throughout the process
Before You Buy
- You must already own compatible Hondata K-Pro or S300 hardware and the equipment required to datalog.
- Your vehicle must be mechanically sound and ready to tune.
- Select the correct setup, fuel, and platform before checkout.
- Tuning services must be started within 30 days of purchase unless Yosh Tuned approves otherwise.
- Do not perform wide-open-throttle pulls until instructed.
How It Works
- Purchase the correct service for your setup.
- Complete the required vehicle/setup information.
- Receive your starting calibration.
- Perform only the requested datalogs.
- Send logs with your order number for review.
- Receive revisions until the calibration is completed.
Read: How E-Tuning Works | Pre-Tuning Checklist | FAQ
Important
E-tuning is a calibration service and cannot repair mechanical, electrical, wiring, sensor, boost-leak, fuel-system, or hardware problems. If an issue prevents safe tuning, it must be corrected before tuning can continue.
Calibration service only: K-Pro/S300 hardware, ECU hardware, laptop, cables, wideband equipment, and other tuning hardware are not included.
Already tuned by Yosh Tuned and changed major components or fuel? Use the Existing Customer Re-Tune service unless instructed otherwise.
Using an OBD1-style B-series ECU with S300 V3? Read our Hondata S300 V3 remote tuning guide before choosing your platform and fuel options.
